Three pick up and four forward suck heads with angle adjustment.
Preloading device with rail cart and scaled gate
Manually side adjustment of pallet table (+/- 40 mm)
Non-stop feeder with automatic pile lift
Side blowers adjustable according to sheet size for smooth feeding.
Four front lay with dial read out at the operation side, and adjustable in pair.
Pull and Push convertible Side Lay (OS and OOS) with photo sensor sheet arrival control
Two modes of Double sheet detector, ultrasonic or mechanical type alternative on stock range.
Ultrasonic type for paper and cardboard, mechanical for flute corrugated board.
Precision worm gear crank toggle driving system to ensure smooth and dynamic lower platen movement
Short stroke movable platen, driven by eccentric worm gear and toggle mechanism allows large motion angle hence minimum number and size of nicks at reasonable max. production speed.
Precision stationery upper platen.
State-of-art 3 cam index gripper bar drive system to ensure smooth and precise gripper bar intermittent movement.
Pneumatic clutch/brake for main drive system.
Motorized cutting force setting by push button.
Digital strain gauge die cutting pressure tonnage display at HMI with adjustable pressure limit protection.
Seven high precision alloy gripper bar.
High quality pre-stretched gripper bar drive chain.
Torque limit safety clutch to protect the index drive system in case of gripper bar crash.
Double cam driven gripper opener and front lay swing frame without position restore spring for smooth and accurate sheet register and take off.
Pneumatic push button die chase locking mechanism to ensure safe and operator friendly changing of the die.
5mm hardened cutting plate or 4+1mm sandwich plate (optional) on top of 15mm precision synthetic supporting plate with +/-0.9mm micro adjustment for quick set up and make ready.
Automatic main chain greasing system .
Complete set of stripping tools with upper and lower stripping pins
Centre line system for quick stripping die set up
Integrated Quick Locking System
Automatic quick locking device for the upper tool integrated in the machine
Funnel for waste guidance
Most efficient and smooth cam running curve drives the stripping tooling with large motion angle to ensure clean and tiny stripping at speed
Pneumatic quick lifting device for upper frame
Automatic delivery with non – stop curtain. This curtain moves into the delivery to catch the arriving sheets during the pile exchange
Five section brush brake each section angle adjustable individually
Air blower to press down the sheets
Rare and side joggers with easy position adjustment
Safety device to prevent the steel pile plate from clamping on the foot when it reaches at ground level
Maximum Sheet Size
: 1060 × 760 mm
Minimum Sheet Size
: 400 × 350 mm
Maximum Cutting Size
: 1060 × 745 mm
Inner Chase Size
: 1080 × 770 mm
1. Paper (depending on quality), min.
: 90 g/m2
2. Board (depending on quality), up to (*)
: 1000 g/m2
3. Corrugated Board, up to (*)
: 4 mm
(*) Carton acceptable wrap: 2% of the width wise sheet
Minimum Gripper Margin
: 9~17 mm
Cutting Rule Height
: 23.8 mm
Minimum Width of Double Cuts
: 5 mm
Maximum Mechanical Speed
: 8000 cycles/hour
Maximum Cutting Pressure
: 260 Tons
Maximum Pile Height at Feeder - Normal Mode
: 1800 mm
Maximum Pile Height at Feeder - Non-stop Mode
: 1520 mm
Maximum Pile Height at Delivery
: 1550 mm
Total Power Required
: 23 KW
Main Motor Power
: 15 KW
Net Weight of Machine
: 20000 kg
:7420 (L) × 4520 (W) × 2640 (H) mm (incl. Catwalk)