1620 Extra Series Automatic Diecutting & Creasing Mac

PE1620S(H)L-Extra Automatic Diecutting & Creasing Machine with Servo Drive Extended Long Feeder

FEEDER

  • Non-stop “ L” type bottom feeding system with extended long feeding table and side lay

  • Pneumatic side push guide plate (right side only)

  • Motorized feeding roller

  • Paper hold down pressing plate and front lay with double sheet detector

  • Vacuum/blow pump

  • Slow down device at front lay for gentle and precise sheet front edge registration

  • FRONT LAY WITH SLOW DOWN AND SIDE REGISTER LAY PUSH

  • Sheet arrives at front lay with servo motor controlled slow down action for precise registration

  • Both left and right side push lay to ensure the accuracy of side register

  • Advanced non-stop adjustment of feeding timing

DIECUTTING SECTION

  • Crank and worm gear, toggle drive system for the lower platen

  • The mobile platen stroke is increased from 71mm to 95mm for handling corrugated board (especially AB Flute) smoother

  • Stationary high precision upper platen

  • Safety door and diechase safety locking system

  • High torque pneumatic clutch/break for positive clutch on and reliable breaking, and special air inlet system to control the air volume for smooth machine start and stop

  • Air cushion underneath the cutting plate for easy cutting plate in and out

  • Gear main drive

  • Overloading protection torque limit clutch

  • State-of-the-art 3 cam index gripper chain drive

  • Center line system compatible to Center Line II, makes the cutting die and stripping die centered quickly

  • 8 high quality precision alloy gripper bars, each with 12 special hardened grippers to ensure firm grab of the sheet at high speed

  • Sheet arrival and departure check photo sensor

  • Left and right front lay locking blocks, separating and synchronizing adjustment available

  • Chain guide rail use VL compound to improve abrasive resistance and seismic resistance

  • Self-diagnostic trouble display

  • Digital speed display

  • Automatic recycling lubrication system with oil pressure gauge and oil pressure switch

  • Automatic main gripper drive chain lubrication

STRIPPING SECTION

  • Centerline system (compatible to Centerline II)

  • 400mm upper stripping frame raiser enhances greatly the operation space, more operator friendly

  • Motorized upper frame suspending hoister

  • Lead edge waste removal system

  • Centerline system for quick stripping die set up

DELIVERY

  • Escalator delivery fork with non-stop air cylinder for neat and positive delivery and conveyor belt delivery table to protect the sheets from scratches

  • Bundle delivery with pre-set counter requesting only one sheet interval in non-stop operation at 4500S/H production speed

  • The bundle delivery table can be prepared for future connection with breaker for in line operation (to be required at order)

  • Full stripping with/without lead edge waste stripping convertible by one button, no tool change, more operator friendly and safe operation

  • Spring loaded adjustable chain tension back buffering wheel to maintain the chain tension constant and smooth gripper bar movement

  • Electronic batch counter

Maximum Sheet Size:1620x1200mm
Minimum Sheet Size:650x450mm
Maximum Cutting Size:1600x1180mm
Inner Chase Size:1630x1210mm
Maximum Mechanical Speed:5000 cycles/hour
Maximum Cutting Pressure:400 tons
Stock Range:E, B,C,A and AB flute corrugated board (1~8.5mm)
Minimum Gripper Margin:6~12mm
Minimum Gripper Waste:12mm(Distance from first knife to paper edge)
Cutting Rule Height:23.8mm
Total Power Required:42 KW
Main Motor Power:22 KW
Electrical Power:380V, 50HZ, 3-phase
Air Pump Displacement:0.7m³/min
Mobile Lower Platen Adjusting Range:±1.5mm
Net Weight of Machine:35 tons
Gross Weight of Machine:40 tons
Machine Dimensions:11005(L)x5670(W)x2480(H)mm(incl. Catwalk)

Contact Us

NO. 1125, TAISHUN RD, ANTING TOWN, JIADING DISTRICT, SHANGHAI, 201814 CHINA

Domestic Sales:
86 21 59502461
International Sales:
86 21 64262538

© 2016 Shanghai Eternal Machinery CO., LTD.

More Inquiries

Didn’t find the information you need?

Please send emails to export@eterna-shanghai.com

aaa